WOOD STAINING SERVICES

In Utah's high-UV, high-altitude climate, most exterior wood stains need to be reapplied every two to four years depending on the stain type, wood species, and sun exposure. South-facing surfaces and horizontal surfaces like deck floors weather faster than vertical or shaded surfaces. Semi-transparent stains typically need recoating sooner than solid stains.

For most wood fences, stain is the better choice. Penetrating stains soak into the wood fibers and protect from within, allowing the wood to breathe and expand naturally. Paint sits on the surface and can peel, crack, and blister as the wood moves with temperature and moisture changes. Stain also showcases the natural beauty of the wood grain.

Semi-transparent stains add color while allowing the wood grain to show through, giving a natural appearance. Solid stains provide opaque coverage similar to paint but with the penetrating properties of stain. Semi-transparent is ideal for newer wood with attractive grain, while solid stain is better for older or weathered wood that needs more coverage.

Yes, but timing is important. New pressure-treated lumber needs to dry for several weeks before staining so that the treatment chemicals do not interfere with stain penetration. We can assess your pressure-treated wood and determine if it is ready for staining. Once properly dried, pressure-treated wood accepts stain well.

We stain both new and existing wood surfaces. New wood benefits from staining as soon as it is ready, as it provides immediate protection against UV and moisture. For existing surfaces, we properly prepare the wood by cleaning, stripping if necessary, and brightening before applying fresh stain.

The best time for exterior wood staining in Utah is late spring through early fall when temperatures are consistently between 50 and 90 degrees Fahrenheit and there is no rain in the forecast for 24 to 48 hours after application. Stain needs dry conditions and moderate temperatures to penetrate and cure properly.

For large fence projects, we use a combination of airless spray application and back-brushing. Spraying provides fast, even coverage while back-brushing works the stain into the wood grain for maximum penetration. This method is efficient for long fence runs and delivers consistent, professional results.

In most cases, yes. We use a multi-step process that includes pressure washing to remove gray weathered fibers, applying a wood brightener to restore color and open the grain, and then applying fresh stain. The results can be dramatic, bringing old gray wood back to a rich, warm appearance. However, if the wood has structural deterioration, it may need replacement before staining.